About 1,000,000 results
Open links in new tab
  1. LVDS Display Interfacing with Custom IMX93 Board

    Jan 29, 2025 · Dear Experts, I am working on a custom board based on the i.MX93 processor and attempting to bring up an LVDS display ( RVT50HQSNWC00 ) I have added

  2. i.MX 8M Plus - Configuring LVDS channels to odd and even

    Sep 10, 2024 · Figure 2: Normal LVDS cables connection The first Image shows the display output with the patch applied, and connecting the LVDS cables straightforward to the display panel (as shown in …

  3. Enable IMX8MP LVDS panel in uboot - NXP Community

    May 15, 2024 · Solved: We're currently working on enabling an LVDS display in L5.15.52 for an IMX8MP board. We followed a guide on the NXP community website (

  4. Configure LVDS to MIPI DSI Display Bridge (LT9211C) on iMX8MP

    Jun 10, 2025 · Hi NXP Team, I’m currently working on integrating the Lontium LT9211C display bridge with the i.MX8MP EVK. My use case is to input LVDS from the SoC and output MIPI DSI via the …

  5. Add i.MX8MP LVDS driver in uboot - NXP Community

    Oct 23, 2025 · Test environment i.MX8MP EVK LVDS0 LVDS-HDMI bridge(it6263) Uboot2022, Uboot2023 Background Some customers need show logo using LVDS panel. Current BSP doesn't …

  6. LVDS Display Support for Custom Board LDB Node of the Device Tree

    Oct 17, 2023 · I'll be using lvds display directly connected to the mpu, so I should be using lcdif2 which points to the ldb, am I correct? If so do I need to make any additional changes to the evk bsp other …

  7. MX8M Plus support for dual channel LVDS (OLDI std) display

    Nov 18, 2025 · Some correction our display is VESA 24-bit two pixel/clock interface (but OLDI format and signaling is same from this perspective) I am already gone through reference manual of MX8MP, …

  8. i.MX8MP Custom Board LVDS Display - NXP Community

    Sep 25, 2023 · Solved: Hello, We are trying to bring up our LVDS display with our custom board. we've patched the device tree imx8mp-evk.dts for the kernel as

  9. IMX8MM + sn65dsi83 + yocto scarthgap = devicetree problem

    Jan 15, 2025 · Solved: Hello, back to 4.19 warrior I have used this configuration of sn65dsi84 DSI to LVDS bridge in device tree: &i2c1 { clock-frequency = ;

  10. PTN3460, PTN3460I FAQs - NXP Community

    Oct 14, 2020 · The eDP-LVDS has embedded microcontroller and on-chip Non-Volatile Memory (NVM) to allow for flexibility in firmware updates. Both PTN3460 and PTN3460I have a built in configuration …